Phantom-based analysis of variations in automatic exposure control across three mammography systems: implications for radiation dose and image quality in mammography, DBT, and CEM.

BACKGROUND: Automatic exposure control (AEC) plays a crucial role in mammography by determining the exposure conditions needed to achieve specific image quality based on the absorption characteristics of compressed breasts. This study aimed to characterize the behavior of AEC for digital mammography (DM), digital breast tomosynthesis (DBT), and low-energy (LE) and high-energy (HE) acquisitions used in contrast-enhanced mammography (CEM) for three mammography systems from two manufacturers. METHODS: Using phantoms simulating various breast thicknesses, 363 studies were acquired using all available AEC modes 165 DM, 132 DBT, and 66 LE-CEM and HE-CEM. AEC behaviors were compared across systems and modalities to assess the impact of different technical components and manufacturers' strategies on the resulting mean glandular doses (MGDs) and image quality metrics such as contrast-to-noise ratio (CNR). RESULTS: For all systems and modalities, AEC increased MGD for increasing phantom thicknesses and decreased CNR. The median MGD values (interquartile ranges) were 1.135 mGy (0.772-1.668) for DM, 1.257 mGy (0.971-1.863) for DBT, 1.280 mGy (0.937-1.878) for LE-CEM, and 0.630 mGy (0.397-0.713) for HE-CEM. Medians CNRs were 14.2 (7.8-20.2) for DM, 4.91 (2.58-7.20) for a single projection in DBT, 11.9 (8.0-18.2) for LE-CEM, and 5.2 (3.6-9.2) for HE-CEM. AECs showed high repeatability, with variations lower than 5% for all modes in DM, DBT, and CEM. CONCLUSIONS: The study revealed substantial differences in AEC behavior between systems, modalities, and AEC modes, influenced by technical components and manufacturers' strategies, with potential implications in radiation dose and image quality in clinical settings. RELEVANCE STATEMENT: The study emphasized the central role of automatic exposure control in DM, DBT, and CEM acquisitions and the great variability in dose and image quality among manufacturers and between modalities. Caution is needed when generalizing conclusions about differences across mammography modalities. KEY POINTS: • AEC plays a crucial role in DM, DBT, and CEM. • AEC determines the "optimal" exposure conditions needed to achieve specific image quality. • The study revealed substantial differences in AEC behavior, influenced by differences in technical components and strategies.

Effect of X-ray tube on image quality and pancreatic ductal adenocarcinoma conspicuity in pancreatic protocol dual-energy CT.

AIM: To compare the radiation dose, image quality, and conspicuity of pancreatic ductal adenocarcinoma (PDAC) in pancreatic protocol dual-energy computed tomography (CT) between two X-ray tubes mounted in the same CT machine. MATERIAL AND METHODS: This retrospective study comprised 80 patients (median age, 73 years; 45 men) who underwent pancreatic protocol dual-energy CT from January 2019 to March 2022 using either old (Group A, n=41) or new (Group B, n=39) X-ray tubes mounted in the same CT machine. The imaging parameters were completely matched between the two groups, and CT data were reconstructed at 70 and 40 keV. The CT dose-index volume (CTDIvol); CT attenuation of the abdominal aorta, pancreas, and PDAC; background noise; and qualitative scores for the image noise, overall image quality, and PDAC conspicuity were compared between the two groups. RESULTS: The CTDIvol was lower in Group B than Group A (7.9 versus 9.2 mGy; p<0.001). The CT attenuation of all anatomical structures at 70 and 40 keV was comparable between the two groups (p=0.06-0.78). The background noise was lower in Group B than Group A (12 versus 14 HU at 70 keV, p=0.046; and 26 versus 30 HU at 40 keV, p<0.001). Qualitative scores for image noise and overall image quality at 70 and 40 keV and PDAC conspicuity at 40 keV were higher in Group B than Group A (p<0.001-0.045). CONCLUSION: The latest X-ray tube could reduce the radiation dose and improve image quality in pancreatic protocol dual-energy CT.

Physical and dosimetric characterisation of different Contrast-Enhanced digital mammographic systems: A multicentric study.

PURPOSE: Contrast-enhanced digital mammography (CEDM) is a relatively new imaging technique recombining low- and high-energy mammograms to emphasise iodine contrast. This work aims to perform a multicentric physical and dosimetric characterisation of four state-of-the-art CEDM systems. METHODS: We evaluated tube output, half-value-layer (HVL) for low- and high-energy and average glandular dose (AGD) in a wide range of equivalent breast thicknesses. CIRS phantom 022 was used to estimate the overall performance of a CEDM examination in the subtracted image in terms of the iodine difference signal (S). To calculate dosimetric impact of CEDM examination, we collected 4542 acquisitions on patients. RESULTS: Even if CEDM acquisition strategies differ, all the systems presented a linear behaviour between S and iodine concentration. The curve fit slopes expressed in PV/mg/cm2 were in the range [92-97] for Fujifilm, [31-32] for GE Healthcare, [35-36] for Hologic, and [114-130] for IMS. Dosimetric data from patients were matched with AGD values calculated using equivalent PMMA thicknesses. Fujifilm exhibited the lowest values, while GE Healthcare showed the highest. CONCLUSION: The subtracted image showed the ability of all the systems to give important information about the linearity of the signal with the iodine concentrations. All the patient-collected doses were under the AGD EUREF 2D Acceptable limit, except for patients with thicknesses ≤35 mm belonging to GE Healthcare and Hologic, which were slightly over. This work demonstrates the importance of testing each CEDM system to know how it performs regarding dose and the relationship between PV and iodine concentration.

Deformable 3D/3D CT-to-digital-tomosynthesis image registration in image-guided bronchoscopy interventions.

Traditional navigational bronchoscopy procedures rely on preprocedural computed tomography (CT) and intraoperative chest radiography and cone-beam CT (CBCT) to biopsy peripheral lung lesions. This navigational approach is challenging due to the projective nature of radiography, and the high radiation dose, long imaging time, and large footprints of CBCT. Digital tomosynthesis (DTS) is considered an attractive alternative combining the advantages of radiography and CBCT. Only the depth resolution cannot match a full CBCT image due to the limited angle acquisition. To address this issue, preoperative CT is a good auxiliary in guiding bronchoscopy interventions. Nevertheless, CT-to-body divergence caused by anatomic changes and respiratory motion, hinders the effective use of CT imaging. To mitigate CT-to-body divergence, we propose a novel deformable 3D/3D CT-to-DTS registration algorithm employing a multistage, multiresolution approach and using affine and elastic B-spline transformation models with bone and lung mask images. A multiresolution strategy with a Gaussian image pyramid and a multigrid strategy within the B-spline model are applied. The normalized correlation coefficient is included in the cost function for the affine model and a multimetric weighted cost function is used for the B-spline model, with weights determined heuristically. Tested on simulated and real patient bronchoscopy data, the algorithm yields promising results. Assessed qualitatively by visual inspection and quantitatively by computing the Dice coefficient (DC) and the average symmetric surface distance (ASSD), the algorithm achieves mean DC of 0.82±0.05 and 0.74±0.05, and mean ASSD of 0.65±0.29mm and 0.93±0.43mm for simulated and real data, respectively. This algorithm lays the groundwork for CT-aided intraoperative DTS imaging in image-guided bronchoscopy interventions with future studies focusing on automated metric weight setting.

Clinical image quality assessment and mean glandular dose for full field digital mammography.

This study aims to assess the image quality (IQ) of 12 mammographic units and to identify units with potential optimisation needs. Data for 350 mammography examinations meeting inclusion criteria were collected retrospectively from April 2021 to April 2022. They were categorised based on the medical reports into 10 normal cases, 10 cases displaying calcifications and 10 cases presenting lesions. Two radiologists assessed the IQ of 1400 mammograms, evaluating system performance per Boitaet al's study and positioning performance following European guidelines. To measure agreement between the two radiologists, the Cohen's Kappa coefficient (κ) was computed, quantifying the excess of agreement beyond chance. The visual grading analysis score (VGAS) was computed to compare system and positioning performance assessments across different categories and facilities. Median average glandular dose (AGD) values for cranio caudal and medio lateral oblique views were calculated for each category and facility and compared to the national diagnostic reference levels. The health facilities were categorised by considering both IQ VGAS and AGD levels. Inter-rater agreement between radiologists ranged from poor (κ< 0.20) to moderate (0.41 <κ< 0.60), likely influenced by inherent biases and distinct IQ expectations. 50% of the facilities were classified as needing corrective actions for their system performance as they had IQ or high AGD that could increase recall rate and radiation risk and 50% of the health facilities exhibited insufficient positioning performance that could mask tumour masses and microcalcifications. The study's findings emphasise the importance of implementing quality assurance programs to ensure optimal IQ for accurate diagnoses while adhering to radiation exposure guidelines. Additionally, comprehensive training for technologists is essential to address positioning challenges. These initiatives collectively aim to enhance the overall quality of breast imaging services, contributing to improved patient care.

Comparing the standard knee X-ray exposure factor, 10 kV rule, and modified 10 kV rule techniques in digital radiography to reduce patient radiation dose without loss of image quality.

INTRODUCTION: The 10 Kilovoltage (kV) rule was a historic exposure adaption technique designed for film screen X-ray imaging to reduce ionising radiation dose without loss of image quality. This study evaluates knee X-ray radiation dose and image quality between standard patient exposure factors, the historic 10 kV rule (-50 % Milliampere-second (mAs), and a modified 10 kV rule (-75 % mAs) using a digital radiography (DR) system. METHOD: Applying the exposure factors of 63 kV and 8 mAs (standard pre-set exposure), 73 kV and 4 mAs (historic 10 kV rule) and 73 kV and 2 mAs (modified 10 kV) to a phantom knee and recording entrance skin dose (ESD) using thermoluminescence dosemeters (TLDs). The ESD was analysed with a t-test. The image quality was assessed using a Likert 5-point Visual Grading Analysis (VGA) by (n = 3) independent observers. The ESD data was analysed with Analysis of Variance (ANOVA) for differences between the techniques. RESULTS: The ESD reduction for the historic 10 kV rule was 32.1-33.7 % (20.9 µGy; p = 0.00), and the modified 10 kV rule 81.5-81.8 % (42.1-43.7 µGy; p = 0.00) compared to the standard pre-set exposure technique. The historic and modified 10 kV exposure parameters image quality for the AP views knee X-rays scored higher (p = 0.00) than the standard preset exposure images. The VGA for the lateral knee view using the historic (-0.1 VGA; p = 0.02) and the modified 10 kV (-0.3 VGA; p = 0.00) were slightly lower than the standard preset image quality, related to the trabeculae pattern and cortical outlines. CONCLUSION: The findings suggest dose reductions could be made by modifying the exposure factors without reducing the quality of diagnostic images in the AP Knee position. The findings for the lateral knee X-rays indicate the image quality scored lower but was still within diagnostic range. Further research is required in laboratory conditions of exposure adaptations over a larger sample of anatomy thickness and applying a wider exposure (kV) range. IMPLICATIONS FOR PRACTICE: One of a radiographer's many roles are to optimise techniques to improve image quality of anatomy and reduce the radiation dose to the patient. The findings have shown there is potential for further research using the modified 10 kV rule.

A spiculated mass target model for clinical image quality control in digital mammography.

OBJECTIVES: Quality assurance of breast imaging has a long history of using test objects to optimize and follow up imaging devices. In particular, the evaluation of new techniques benefits from suitable test objects. The applicability of a phantom consisting of spiculated masses to assess image quality and its dependence on dose in flat field digital mammography (FFDM) and digital breast tomosynthesis systems (DBT) is investigated. METHODS: Two spiculated masses in five different sizes each were created from a database of clinical tumour models. The masses were produced using 3D printing and embedded into a cuboid phantom. Image quality is determined by the number of spicules identified by human observers. RESULTS: The results suggest that the effect of dose on spicule detection is limited especially in cases with smaller objects and probably hidden by the inter-reader variability. Here, an average relative inter-reader variation of the counted number of 31% was found (maximum 83%). The mean relative intra-reader variability was found to be 17%. In DBT, sufficiently good results were obtained only for the largest masses. CONCLUSIONS: It is possible to integrate spiculated masses into a cuboid phantom. It is easy to print and should allow a direct and prompt evaluation of the quality status of the device by counting visible spicules. Human readout presented the major uncertainty in this study, indicating that automated readout may improve the reproducibility and consistency of the results considerably. ADVANCES IN KNOWLEDGE: A cuboid phantom including clinical objects as spiculated lesion models for visual assessing the image quality in FFDM and DBT was developed and is introduced in this work. The evaluation of image quality works best with the two larger masses with 21 spicules.

Radiation doses received in the UK breast screening programmes 2019-2023.

OBJECTIVE: To report the latest UK mammography dose survey results and to compare radiation doses from digital breast tomosynthesis (DBT) and full-field digital mammography (FFDM) in UK breast screening. METHODS: Anonymized exposure factors were collected for 111 152 screening cases and 5113 assessment cases from 405 x-ray sets across the United Kingdom using an online submission system linked to a national database of mammography quality control data. Output and beam quality measurements from each set were combined with exposure data to estimate mean glandular doses (MGD). RESULTS: FFDM doses increased by ∼10% compared to the 2016-2019 national survey but compressed breast thicknesses (CBT) remained similar. DBT doses were 34%-40% higher than FFDM overall and 34% higher than FFDM for breasts 50-60 mm thick. We found a possible overestimation of PMMA breast equivalent thicknesses at low CBTs, but the evidence was not conclusive. CONCLUSION: Recent changes to the mix of x-ray models in use in UK breast screening have resulted in higher FFDM breast doses. DBT doses in the NHSBSP are on average higher than FFDM by ∼34%-40%. ADVANCES IN KNOWLEDGE: This is the first national study to report DBT and FFDM MGDs in UK breast screening.

Task-based detectability in anatomical background in digital mammography, digital breast tomosynthesis and synthetic mammography.

Objective.Determining the detectability of targets for the different imaging modalities in mammography in the presence of anatomical background noise is challenging. This work proposes a method to compare the image quality and detectability of targets in digital mammography (DM), digital breast tomosynthesis (DBT) and synthetic mammography.Approach. The low-frequency structured noise produced by a water phantom with acrylic spheres was used to simulate anatomical background noise for the different types of images. A method was developed to apply the non-prewhitening observer model with eye filter (NPWE) in these conditions. A homogeneous poly(methyl) methacrylate phantom with a 0.2 mm thick aluminium disc was used to calculate 2D in-plane modulation transfer function (MTF), noise power spectrum (NPS), noise equivalent quanta, and system detective quantum efficiency for 30, 50 and 70 mm thicknesses. The in-depth MTFs of DBT volumes were determined using a thin tungsten wire. The MTF, system NPS and anatomical NPS were used in the NPWE model to calculate the threshold gold thickness of the gold discs contained in the CDMAM phantom, which was taken as reference. Main results.The correspondence between the NPWE model and the CDMAM phantom (linear Pearson correlation 0.980) yielded a threshold detectability index that was used to determine the threshold diameter of spherical microcalcifications and masses. DBT imaging improved the detection of masses, which depended mostly on the reduction of anatomical background noise. Conversely, DM images yielded the best detection of microcalcifications.Significance.The method presented in this study was able to quantify image quality and object detectability for the different imaging modalities and levels of anatomical background noise.

Threshold in breast compression reduction for full-field digital mammography and digital breast tomosynthesis.

INTRODUCTION: Breast compression is essential in mammography to improve image quality and reduce radiation dose. However, it can cause discomfort or even pain in women which could discourage them from attending future mammography examinations. Therefore, this study aims to explore the maximum reduction in breast compression in full-field digital mammography (FFDM) and digital breast tomosynthesis (DBT) that is achievable without impacting on image quality and dose. METHODS: Ten compression force (CF) levels (20N-110N, with 10N intervals) were assessed on Siemens MAMMOMAT Inspiration with Nuclear Associates 18-228 phantom. Imaging was carried out in craniocaudal projection using Automatic Exposure Control at 28 kVp with a Tungsten/Rhodium anode/filter combination, and at 50° sweep angle for DBT. Using ImageJ software, image quality of the acquired mammograms and central tomosynthesis slices were examined based on mass conspicuity (MC) and microcalcification conspicuity (MicroC). Entrance skin dose (ESD) and mean glandular dose (MGD) were recorded from Digital Imaging and Communication in Medicine image header. Linear regression was performed to examine the relationship between CF with ESD, MGD, MC and MicroC. Differences in image quality and radiation dose were assessed with one-way analysis of variance and Kruskal-Wallis H test. RESULTS: Significant correlations were noted between CF with ESD and MicroC for FFDM and DBT, with DBT also demonstrating associations with MGD and MC. No significant differences were observed for ESD, MGD, MC and MicroC when CF was reduced to 40N and 80N in FFDM and DBT respectively. CONCLUSION: This study demonstrated that CF can be reduced as low as 40N and 80N in FFDM and DBT respectively, without significant impact on image quality and radiation dose. IMPLICATIONS FOR PRACTICE: Reduced mammographic compression may reduce discomfort or pain in women, which may improve attendance rate in breast screening programmes. Findings from this study will provide reference for future work examining breast compression in mammography.

Effect of 3 different disinfection methods on the image quality of photostimulable phosphor plates.

OBJECTIVE: The aim of this study was to assess the effects of 3 disinfection protocols on the quality of images acquired with a photostimulable phosphor (PSP) plate system. STUDY DESIGN: Thirty DIGORA Optime PSP plates were divided into 3 groups of 10. Group 1 was disinfected with 95% ethanol. Group 2 was disinfected using germicidal disposable wipes. Group 3 was disinfected with 95% ethanol, followed by hydrogen peroxide gas sterilization. Images of a quality assurance phantom were acquired on each plate before disinfection (baseline images). Disinfection and imaging cycles were repeated 45 times for each plate. Changes in image quality were assessed between baseline and final images. Image quality was evaluated for dynamic range, spatial resolution, and contrast perceptibility. The Fisher exact test was used to detect statistically significant differences among the 3 disinfection methods relative to decreases in image quality parameters between the baseline and final radiographs. Additionally, for each group, the Z-test was used to detect statistically significant decreases in image quality parameters between baseline and final images. The significance level was established at P < .05. RESULTS: No statistically significant differences were detected among the disinfection groups or relative to baseline values for any group at a 5% significance level. CONCLUSIONS: Hydrogen peroxide gas may be considered to prevent cross-contamination while preserving image quality. Regular quality assurance testing is recommended to maintain image quality over time.

Evaluation of the ear ossicles with photon-counting detector CT.

Recently, computed tomography with photon-counting detector (PCD-CT) has been developed to enable high-resolution imaging at a lower radiation dose. PCD-CT employs a photon-counting detector that can measure the number of incident X-ray photons and their energy. The newly released PCD-CT (NAEOTOM Alpha, Siemens Healthineers, Forchheim, Germany) has been in clinical use at our institution since December 2022. The PCD-CT offers several advantages over current state-of-the-art energy-integrating detector CT (EID-CT). The PCD-CT does not require septa to create a detector channel, while EID-CT does. Therefore, downsizing the anode to achieve higher resolution does not affect the dose efficiency of the PCD-CT. CT is an indispensable modality for evaluating ear ossicles. The ear ossicles and joints are clearly depicted by PCD-CT. In particular, the anterior and posterior legs of the stapes, which are sometimes unclear on conventional CT scans, can be clearly visualized. We present cases of congenital anomalies of the ossicular chain, ossicular chain dislocation, tympanosclerosis, and cholesteatoma in which PCD-CT was useful. This short article reports the usefulness of PCD-CT in the 3D visualization of the ear ossicles.

Entrance surface air kerma to patients during digital radiographic examinations in Tanzania.

The aim of this study was to determine the entrance surface air kerma (ESAK) in adult patients during digital radiography and to evaluate the optimisation potential in five common X-ray examinations in Tanzania. Based on a sample of 240-610 patients, ESAK was estimated using X-ray tube output measurements, patient information and backscatter factors. The results show that the mean ESAK values were higher or comparable to data from the literature. The diagnostic reference values of ESAK for digital radiography were 0.31 mGy (chest PA), 4 mGy (lumbar spine AP), 5.4 mGy (lumbar spine LAT), 3.8 mGy (abdomen AP) and 2.4 mGy (pelvis AP). For computed radiography, the mean ESAK ranges were 0.44-0.57 mGy (thoracic AP), 3.59-3.72 mGy (lumbar spine AP), 6.16-6.35 mGy (lumbar spine LAT), 3.89-3.44 mGy (abdominal AP) and 2.92-3.47 mGy (pelvic AP). In conclusion, high ESAK variations show the potential for optimising protection in digital radiology.

Image processing setting adaptions according to image dose and radiologist preference can improve image quality in computed radiography of the equine distal limb: A cadaveric study.

Image processing (IP) in digital radiography has been steadily refined to improve image quality. Adaptable settings enable users to adjust systems to their specific requirements. This prospective, analytical study aimed to investigate the influence of different IP settings and dose reductions on image quality. Included were 20 cadaveric equine limb specimens distal to the metacarpophalangeal and metatarsophalangeal joints. Images were processed with the Dynamic Visualization II system (Fujifilm) using five different IP settings including multiobjective frequency processing, flexible noise control (FNC), and virtual grid processing (VGP). Seven criteria were assessed by three veterinary radiology Diplomates and one veterinary radiology resident in a blinded study using a scoring system. Algorithm comparison was performed using an absolute visual grading analysis. The rating of bone structures was improved by VGP at full dose (P < .05; AUCVGC  = 0.45). Überschwinger artifact perception was enhanced by VGP (P < .001; AUCVGC  = 0.66), whereas image noise perception was suppressed by FNC (P < .001; AUCVGC  = 0.29). The ratings of bone structures were improved by FNC at 50% dose (P < .05; AUCVGC  = 0.44), and 25% dose (P < .001; AUCVGC  = 0.32), and clinically acceptable image quality was maintained at 50% dose (mean rating 2.16; 95.8% ratings sufficient or better). The favored IP setting varied among observers, with higher agreement at lower dose levels. These findings supported using individualized IP settings based on the radiologist's preferences and situational image requirements, rather than using default settings.

Measurements of the noise power spectrum for digital x-ray imaging devices.

Objective.The noise characteristics of digital x-ray imaging devices are determined by contributions such as photon noise, electronic noise, and fixed pattern noise, and can be evaluated from measuring the noise power spectrum (NPS), which is the power spectral density of the noise. Hence, accurately measuring NPS is important in developing detectors for acquiring low-noise digital x-ray images. To make accurate measurements, it is necessary to understand NPS, identify problems that may arise, and know how to process the obtained x-ray images.Approach.The primitive concept of NPS is first introduced with a periodogram-based estimate and its bias and variance are discussed. In measuring NPS based on the IEC62220 standards, various issues, such as the fixed pattern noise, high-precision estimates, and lag corrections, are summarized with simulation examples.Main results.High-precision estimates can be provided for an appropriate number of samples extracted from x-ray images while compromising spectral resolution. Depending on medical imaging systems, by eliminating the influence of fixed pattern noise, NPS, which represents only photon and electronic noise, can be efficiently measured. For NPS measurements in dynamic detectors, an appropriate lag correction technique can be selected depending on the emitted x-rays and image acquisition process.Significance.Various issues in measuring NPS are reviewed and summarized for accurately evaluating the noise performance of digital x-ray imaging devices.

Optimizing Contrast Resolution in Digital Chest Radiography by Varying Copper Filtration and kVp.

PURPOSE: To measure the effect of increasing kilovoltage peak (kVp) and copper filtration thickness on entrance skin exposure and contrast resolution for chest radiography performed using digital flat-panel detectors. METHODS: A phantom-based experiment was conducted in which 24 radiographs of a quality control chest phantom were obtained at varying kVp levels and copper filtration thicknesses. The entrance skin exposure was measured and analyzed for each exposure. All radiographs were analyzed based on measured pixel values and contrast:noise ratio (CNR) and using subjective analysis, which focused on contrast resolution assessment performed by 4 radiologists. RESULTS: The results from the subjective image analysis showed that increasing copper filtration in increments of 0.1 mm resulted in less of a decrease in contrast resolution compared with increasing the kVp by 10 kVp, and that contrast resolution is more dependent on energy level than on filtration. The results from objective image analysis indicated that CNR decreased when kVp increased at all filtration thicknesses, but consistent dependency between CNR and filtration was not evident. Exposure data analysis showed an average 46% decrease in entrance skin exposure for each increase of 0.1 mm in copper filtration thickness. DISCUSSION: Although subjective and objective data analysis results indicated that increases of copper filtration are more beneficial to maintaining contrast resolution and reducing entrance skin exposure compared with increases of kVp, objective image data analysis showed a greater reduction in contrast resolution when kVp is increased. These results validate previous research that concluded that copper filtration should be considered as a dose-reduction and image-optimization strategy in digital radiography departments. CONCLUSION: Although entrance skin exposure reduction can be accomplished using higher kVp and copper filtration, increasing copper filtration thickness could be considered to minimize the loss of contrast resolution for routine chest imaging when digital flat-panel detectors are used.

Breast density analysis of digital breast tomosynthesis.

Mammography shifted to digital breast tomosynthesis (DBT) in the US. An automated percentage of breast density (PD) technique designed for two-dimensional (2D) applications was evaluated with DBT using several breast cancer risk prediction measures: normalized-volumetric; dense volume; applied to the volume slices and averaged (slice-mean); and applied to synthetic 2D images. Volumetric measures were derived theoretically. PD was modeled as a function of compressed breast thickness (CBT). The mean and standard deviation of the pixel values were investigated. A matched case-control (CC) study (n = 426 pairs) was evaluated. Odd ratios (ORs) were estimated with 95% confidence intervals. ORs were significant for PD: identical for volumetric and slice-mean measures [OR = 1.43 (1.18, 1.72)] and [OR = 1.44 (1.18, 1.75)] for synthetic images. A 2nd degree polynomial (concave-down) was used to model PD as a function of CBT: location of the maximum PD value was similar across CCs, occurring at 0.41 × CBT, and PD was significant [OR = 1.47 (1.21, 1.78)]. The means from the volume and synthetic images were also significant [ORs ~ 1.31 (1.09, 1.57)]. An alternative standardized 2D synthetic image was constructed, where each pixel value represents the percentage of breast density above its location. Several measures were significant and an alternative method for constructing a standardized 2D synthetic image was produced.

[Research advances in imaging techniques related to the diagnosis of pneumoconiosis].

Occupational pneumoconiosis (hereinafter referred to as pneumoconiosis) is the most harmful occupational disease in China. According to the current standard GBZ 70-2015 Diagnosis of Occupational Pneumoconiosis, pneumoconiosis is mainly diagnosed and staged by high kilovolt or digital radiography. Chest radiography in pneumoconiosis is the most widely studied and mature imaging technique in the diagnosis of pneumoconiosis. However, this technique has some limitations in the screening of some early pneumoconiosis and occupational health examination, and there is a certain risk of missed diagnosis and misdiagnosis. With the continuous development of imaging examination technology, computed tomography, magnetic resonance imaging, positron emission tomography-computed tomography and artificial intelligence technology as auxiliary imaging examination methods have shown different diagnostic values in the research of auxiliary diagnosis of pneumoconiosis. This paper summarizes the advantages and problems in the application of various kinds of imaging techniques, which provides a direction for the future research of imaging techniques related to the diagnosis of pneumoconiosis.

Investigation of test methods for QC in dual-energy based contrast-enhanced digital mammography systems: II. Artefacts/uniformity, exposure time and phantom-based dosimetry.

Part II of this study describes constancy tests for artefacts and image uniformity, exposure time, and phantom-based dosimetry; these are applied to four mammography systems equipped with contrast enhanced mammography (CEM) capability. Artefacts were tested using a breast phantom that simulated breast shape and thickness change at the breast edge. Image uniformity was assessed using rectangular poly(methyl)methacrylate PMMA plates at phantom thicknesses of 20, 40 and 60 mm, for the low energy (LE), high energy (HE) images and the recombined CEM image. Uniformity of signal and of the signal to noise ratio was quantified. To estimate CEM exposure times, breast simulating blocks were imaged in automatic exposure mode. The resulting x-ray technique factors were then set manually and exposure time for LE and HE images and total CEM acquisition time was measured with a multimeter. Mean glandular dose (MGD) was assessed as a function of simulated breast thickness using three different phantom compositions: (i) glandular and adipose breast tissue simulating blocks combined to give glandularity values that were typical of those in a screening population, as thickness was changed (ii) PMMA sheets combined with polyethylene blocks (iii) PMMA sheets with spacers. Image uniformity was superior for LE compared to HE images. Two systems did not generate recombined images for the uniformity test when the detector was fully covered. Acquisition time for a CEM image pair for a 60 mm thick breast equivalent phantom ranged from 3.4 to 10.3 s. Phantom composition did not have a strong influence on MGD, with differences generally smaller than 10%. MGD for the HE images was lower than for the LE images, by a factor of between 1.3 and 4.0, depending on system and simulated breast thickness. When combined with the iodine signal assessment in part I, these tests provide a comprehensive assessment of CEM system imaging performance.